Holiday Case and Power Supply Guide
by Wesley Fink on December 16, 2008 12:00 PM EST- Posted in
- Guides
- Christoph Katzer
We tested the Antec Three Hundred not long ago and we found it to be a small chassis which could even handle a triple-SLI with Nvidia's Geforce 8800 Ultra. The sleek design and the attractive price of around $50 make it a good recommendation for people building small to medium setups.
The P182 is a classic chassis but at the same time it is one of the best ever made: It combines very good quality with the ability to be very silent if you want it to. All sides are shielded to prevent most of the acoustic noise, which makes the Antec P182 attractive even for larger builds with modern high-end graphics cards. It has still a high price tag of $150 but this case is worth every penny spent.
Silverstone's full aluminum tower made a great impression with very good cooling performance using two large fans in a full aluminum case. Silverstone utilizes a “positive air-pressure“ technique that pumps more air inside of the case than fans are exhausting. The positive pressure then pushes the hot air out of every hole in the case. When we changed the direction of the fan from stock we immediately saw higher temperatures and poorer cooling results. The stock positive pressure design really did cool better in our testing. You can find our full review of the FT01 at http://www.anandtech.com/casecoolingpsus/showdoc.aspx?i=3454.
The overall quality of the Silverstone FT01 chassis is unmatched today which brings Silverstone to the top of the food chain when it comes to a high-end chassis. Enthusiasts with enough money to spend will not be disappointed in the FT01. It is not cheap with a price of $210 to $250, but the FT01 remains an exceptional value in a high-end case.
Facebook
Twitter
RSS
32 Comments
View All Comments
gwolfman - Tuesday, December 16, 2008 - link
What did you mean by "When we changed the direction of the fan we immediately saw higher cooling results."? So the positive air pressures made it worse? And when you moved the fan for negative air pressure the temps were lower? OR do you mean that in the not-so-standard positive air pressure configuration temps were lower than when switched?Wesley Fink - Tuesday, December 16, 2008 - link
Test results are available in the FT01 review at http://www.anandtech.com/casecoolingpsus/showdoc.a...">http://www.anandtech.com/casecoolingpsus/showdoc.a.... Best results were with the STOCK (Positive Pressure) Silverstone setup. We will revise the wording in the guide to make that cleare. Thanks for pointing it out.gwolfman - Tuesday, December 16, 2008 - link
Thanks!crimson117 - Tuesday, December 16, 2008 - link
I love my P180, but the one downside I recall was that the power supply cables coming from the bottom interfered with the bottom part of the motherboard, including the USB connections, the lower expansion slots, and those little jumpers that hook up the case power/reset switches and LEDs.I'd strongly recommend either:
- using a smaller motherboard
- using a modular power supply
- leaving the bottom one or two expansion slots empty
The0ne - Tuesday, December 16, 2008 - link
Don't forgot the most important factor for the PS...cables long enough to reach your devices, including the 24V! Had to set aside 2 perfectly good PS because their cables weren't long enough.crimson117 - Tuesday, December 16, 2008 - link
But perhaps this has been improved in the P182 and in newer versions of the P180?http://bigrockies.com/media/p182back.jpg">http://bigrockies.com/media/p182back.jpg
spidey81 - Tuesday, December 16, 2008 - link
I have been loving my build with the P182 that I did in Feb. I found that a modular PSU would definitely be a beneficial choice with the limited clearance between the PSU mounting area and the fan in the bottom chamber.Fortunately I was able to take advantage of space on the backside to route cables for a clean build (and was able to tuck extra cables back there since my Corsair 550VX isn't modular). My cables were plenty long to do this as well as some people have found some PSU's cable to be too short for this case.
It's not as quiet as I was hoping, but it's definitely not as loud as my last case.
As a bonus, I was able to find it on sale at zipzoomfly.com back in Feb. for $120 with $40 rebate for a total of $80!
Vidmar - Tuesday, December 16, 2008 - link
All three of these cases have major cons IMHO.First: Power supply at the bottom. I may be old-school, but just wait till your power supply fan bearings begin to give out since it was installed upside down from what the manufacturer intended.
- The Antec 300 has no removable drive cage.
- The Antec P182 does have a removable dive cage, but then it has a door on the front of the case. Plus the external connectors are too low.
- The Silverstone Fortress FT01 drive cage is a problem for airflow.
For my $$$ this Rosewill R6AR6-BK case has all of the features of any of these cases, cooler performance and a fraction of the cost!
http://www.newegg.com/Product/Product.aspx?Item=N8...">http://www.newegg.com/Product/Product.aspx?Item=N8...
MamiyaOtaru - Thursday, December 18, 2008 - link
Don't weant your PSU upside down? Mount it right side up. Mine's at the bottom of my Coolermaster Stacker, but it sure as heck isn't upside down. It's in the normal orientation, and quietly drawing cool air from under the caseKsyder - Wednesday, December 17, 2008 - link
You can mount the PSU any way you like in the P182... there are screw holes in the case that let you mount the PSU upside down or right side up depending on how you want the fans and/or wires to be.As an aside, as an owner of a P182, I actually wish the chassis didn't have the middle divider because it causes the hard drives to not get any benefit from the 2 top 120mm fans. Granted you can put a 120mm fan in the bottom but the space down there is tight and the PSU by itself doesn't do much to cool the hard drives in terms of moving air through the bottom chamber.